Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production
Chi tiết sản phẩm
| Kiểu: | tuần hoàn tự nhiên | Kết cấu: | Ống lửa và ống nước |
|---|---|---|---|
| Áp lực: | Áp suất thấp / cao | Sản xuất hơi nước: | <i>Max.</i> <b>Tối đa.</b> <i>60t/h</i> <b>60t/giờ</b> |
| Phong cách: | Thẳng đứng | Nhiên liệu: | đốt than |
| Đầu ra: | Nước nóng / Hơi nước | Xử lý bề mặt: | Sơn |
| OD ống trần: | 25-1650 mm | Độ dày ống trần: | 2-40 mm |
| Độ dày vây: | 0,6-3,0 mm | Chiều cao vây: | 5-30 mm |
| Fin ống cao độ: | 5-30 mm | Chiều dài ống vây: | ≤12000 mm |
| Vật liệu: | Thép carbon, Hợp kim, Thép Austenitic | ||
| Làm nổi bật |
Max 60t/h Steam Production Boiler Economizer,Low High Pressure Boiler Economizer,Finned Tubes Boiler Economizer |
||
Mô tả sản phẩm
| Name (unit) | Specification (mm) |
|---|---|
| Bare pipe (OD) | 25-1650 |
| Bare pipe (Thickness) | 2-40 |
| Fin (Thickness) | 0.6-3.0 |
| Fin (Height) | 5-30 |
| Fin tube thread pitch | 5-30 |
| Fin tube length | ≤12000 |
- Impact test and Strength calculation report with applied materials information
- 100% NDT (non-destructive inspection) report of steel plate, tube and electrode
- X-ray, γ-ray and liquid penetrant test inspection report (welding seam) to ensure quality
- Hydraulic test report to ensure standard working pressure and safety
Điểm nổi bật của sản phẩm
Low / High Pressure Flue Gas Boiler Economizer Heat Exchanger Devices With Finned Tubes Boiler Economizer Introduction The economizer performs a key function in providing high overall boiler thermal efficiency by recovering low-level energy from flue gas before it's exhausted to the atmosphere. It ...
Năng lượng áp suất cao nồi hơi sưởi bề mặt Membrane tường Argon hàn cung cho nồi hơi sinh khối
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Phương pháp hàn tần số cao H Fin Tube Economizer cho nồi hơi nhà máy điện ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Thép carbon SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Nồi hơi công nghiệp SA210A1 Nồi hơi thép Economizer Bộ phận trao đổi nhiệt Chứng nhận ASME
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Vui lòng sử dụng biểu mẫu liên lạc trực tuyến của chúng tôi dưới đây nếu bạn có bất kỳ câu hỏi nào, nhóm của chúng tôi sẽ liên lạc lại với bạn càng sớm càng tốt.
