Power Station CFB Boiler Economizer with ASTM Certification for Central Heating
Chi tiết sản phẩm
| Kiểu: | tuần hoàn tự nhiên | Kết cấu: | Ống lửa và ống nước |
|---|---|---|---|
| Áp lực: | Áp suất thấp / cao | Phong cách: | Thẳng đứng |
| Nhiên liệu: | Than / Gas / Đốt than / Nhiệt nước | Đầu ra: | Nước nóng / Hơi nước |
| Cân nặng: | 20000 kg | Xử lý bề mặt: | Sơn |
| OD ống trần: | 25-1650 mm | Độ dày ống trần: | 2-40 mm |
| Độ dày vây: | 0,6-3,0 mm | Chiều cao vây: | 5-30 mm |
| Fin ống cao độ: | 5-30 mm | Chiều dài ống vây: | ≤12000 mm |
| Vật liệu: | Thép carbon, Hợp kim, Thép Austenitic | ||
| Làm nổi bật |
ASTM Certification Boiler Economizer,Central Heating CFB Boiler Economizer,Power Station Boiler Economizer |
||
Mô tả sản phẩm
| Parameter (Unit) | Specification (mm) |
|---|---|
| Bare pipe (OD) | 25-1650 |
| Bare pipe (Thickness) | 2-40 |
| Fin (Thickness) | 0.6-3.0 |
| Fin (Height) | 5-30 |
| Fin tube thread pitch | 5-30 |
| Fin tube length | ≤12000 |
- Impact test and strength calculation reports with complete materials documentation
- 100% NDT (non-destructive testing) of all steel plates, tubes, and electrodes
- Comprehensive weld inspection including X-ray, γ-ray, and liquid penetrant testing
- Hydraulic pressure testing to verify working pressure standards and safety
Điểm nổi bật của sản phẩm
Power Station CFB Boiler Economizer Central Heating ASTM Certification Product Overview The economizer is a mechanical heat exchange device designed to reduce energy consumption by preheating fluids. This unit is specifically engineered for power station CFB (Circulating Fluidized Bed) steam boiler ...
Năng lượng áp suất cao nồi hơi sưởi bề mặt Membrane tường Argon hàn cung cho nồi hơi sinh khối
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Phương pháp hàn tần số cao H Fin Tube Economizer cho nồi hơi nhà máy điện ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Thép carbon SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Nồi hơi công nghiệp SA210A1 Nồi hơi thép Economizer Bộ phận trao đổi nhiệt Chứng nhận ASME
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Vui lòng sử dụng biểu mẫu liên lạc trực tuyến của chúng tôi dưới đây nếu bạn có bất kỳ câu hỏi nào, nhóm của chúng tôi sẽ liên lạc lại với bạn càng sớm càng tốt.
