Flue Gas Boiler Economizer Heat Exchanger with Max 120t/h Steam Production and 1 Year Warranty
Chi tiết sản phẩm
| Kiểu: | tuần hoàn tự nhiên | Kết cấu: | Ống lửa và ống nước |
|---|---|---|---|
| Áp lực: | Áp suất thấp / cao | Sản xuất hơi nước: | Tối đa. 120T/h |
| Phong cách: | Thẳng đứng | Nhiên liệu: | Than / Gas / Đốt than / Nhiệt nước |
| Đầu ra: | Nước nóng / Hơi nước | Vật liệu: | Thép carbon, thép không gỉ, thép hợp kim |
| Phạm vi trọng lượng: | Tối thiểu: tối đa 10 tấn | Quá trình luyện kim: | EF+LF + VD |
| Quá trình: | Vật liệu-> Ingot -> nóng/lạnh-> Xử lý nhiệt (bình thường hóa+ ủ) -> Kiểm tra -> Gia c | Tiêu chuẩn Ut: | ASTM A388 hoặc EN10228 |
| tiêu chuẩn vật liệu: | Astm, en hoặc iso | Loại trao đổi nhiệt: | Bộ tiết kiệm ống F-Finned, Bộ tiết kiệm ống vòng xoắn ốc, Bộ tiết kiệm ống trần |
| Lưu lượng khí thải: | Tăng diện tích, giảm tốc độ | ||
| Làm nổi bật |
Flue Gas Boiler Economizer,Max 120t/h Steam Production Heat Exchanger,1 Year Warranty Finned Tube Economizer |
||
Mô tả sản phẩm
Boiler economizers are heat exchange devices with finned tubes that heat liquids (typically water) to temperatures approaching but not exceeding the liquid's boiling point.
We manufacture three types of boiler economizers:
- Bare tube economizer
- H finned tube economizer
- Spiral finned tube economizer
The H-finned tube economizer is a high-efficiency heat exchanger consisting of H-finned tubes. Compared to bare tube economizers, H-finned tube models offer:
- Larger heat exchange area
- Reduced number of tubes required
- Increased flue gas flow area
- Reduced flue gas flow speed and abrasion
H-finned tubes can be manufactured as double H finned tubes for enhanced rigidity in long tube row applications. The spiral finned economizer features newly designed heat transfer equipment with spiral fin tubes to overcome abrasion issues and extend service life.
| Description | Boiler economizer |
|---|---|
| Material | Alloy steel, Carbon steel, SA210C, SA213T22, etc. |
| Material standard | ASTM, EN or ISO etc. |
| Dimension | Customization |
| Weight | Min: 10 ton Max.:1000 ton |
| Smelting Process | EF+LF + VD |
| Process | Material->Ingot -> Hot/Cold-Rolling-> Heat treatment (Normalizing+ tempering) -> Inspection ->rough machining->UT ->2nd Heat treatment ->finishing machining ->Inspection |
| UT standard | ASTM A388 or EN10228, etc |
- Impact test and Strength calculation report with applied materials information
- 100%NDT(non-destructive inspection) report of steel plate, tube and electrode
- X-ray, γ-ray and liquid penetrant test inspection report (welding seam) to ensure the quality of the entire boiler
- Hydraulic test report to ensure standard working pressure and safety
Điểm nổi bật của sản phẩm
Flue Gas Boiler Economizer Heat Exchanger Devices With Finned Tubes Product Description Boiler economizers are heat exchange devices with finned tubes that heat liquids (typically water) to temperatures approaching but not exceeding the liquid's boiling point. Introduction We manufacture three types ...
Năng lượng áp suất cao nồi hơi sưởi bề mặt Membrane tường Argon hàn cung cho nồi hơi sinh khối
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Phương pháp hàn tần số cao H Fin Tube Economizer cho nồi hơi nhà máy điện ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Thép carbon SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Nồi hơi công nghiệp SA210A1 Nồi hơi thép Economizer Bộ phận trao đổi nhiệt Chứng nhận ASME
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Vui lòng sử dụng biểu mẫu liên lạc trực tuyến của chúng tôi dưới đây nếu bạn có bất kỳ câu hỏi nào, nhóm của chúng tôi sẽ liên lạc lại với bạn càng sớm càng tốt.
